All Products

Custom-branded tape used for sealing and identifying plywood and panel packaging, so shipments carry your brand name and mark from the factory to the buyer. Available in standard roll size, with customization available. Get in touch with your branding requirements for a bulk quote.

1 variant available

Chrome Sol is a liquid insecticide and fungicide used across the plywood and panel industry as a cost-effective substitute for chromic acid in wood preservation treatments. It's applied during the dipping or spraying stage of plywood, block board, and flush door manufacturing to protect the finished panel against borer and termite damage before it leaves the factory. Being supplied in liquid form rather than as a crystalline salt means it goes straight into the treatment tank without a separate dissolving step. Available in 25 L packaging. Supplied under Ply Haat's ISO 9001:2015 and ISO 10002:2018 certified quality system — request a bulk quote for current pricing and lead times.

1 variant available

Copper Sulphate is used as a fungicide in plywood and panel manufacturing, applied during the wood treatment stage to help protect panels from fungal attack. It's supplied as a crystal-clear material with 24–25% copper content. Packed in triple-layer packaging to keep the material protected during transport and storage. Available in 25 kg bags. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing and lead times.

1 variant available

Corrugated fasteners (also called wiggle nails) are wave-shaped metal fasteners used to join veneer sheets edge-to-edge before they go into the hot press — holding adjacent veneer leaves flat and aligned so the panel doesn't shift during pressing. They're driven in with a stitching gun and used alongside Ply Haat's veneer stitching tape on high-volume lines joining large numbers of veneer sheets per shift. Supplied under Ply Haat's ISO 9001:2015 quality system, alongside our veneer stitching tape range. Request a bulk quote for current pricing and packaging.

1 variant available

Ply Haat's CCB (Chromated Copper Boron) dipping chemical is a wood preservative used in the treatment stage of plywood, block board, and flush door manufacturing. It's suitable for use with any face veneer, including Gurjan, Okoume, Holang, and Makai. Quality is controlled to ISI standards, and the treatment is formulated to give a better finish to the final panel — an important detail for manufacturers whose product is judged on surface quality as much as strength. Available in 30 kg packaging. Supplied under Ply Haat's ISO 9001:2015 and ISO 14001:2015 certified quality system — request a bulk quote for current pricing and lead times.

1 variant available

Sanding belts built for drum sanders, used on plywood and panel finishing lines to smooth panel surfaces before dispatch or further finishing. A standard part of most panel finishing setups where consistent surface quality is needed across large volumes. Available in standard drum width, 60 grit. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing and packaging.

1 variant available

Finger joint cutters are used to join small offcuts of solid wood into longer, usable wooden blocks — a standard way to reduce timber wastage on a cutting line. They're designed for use on a Finger Joint Machine and sold as a set of 12 pieces. Used across wood-working operations that process solid wood into longer, structurally sound blocks for further manufacturing. Available in 125mm diameter, 4 teeth, with a 31.75mm or 40mm bore. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Rubber safety gloves for handling chemicals and general plant work — standard protective equipment on any line where workers handle wood preservative chemicals, dipping solutions, or general factory materials. Available in free size, rubber material. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Carbide-tooth saw blades built for economical, precise cutting in laminate and panel board work, where a clean edge matters for the finished product. Used across the laminate industry and panel board industry. Tooth configuration is matched to the cut: higher tooth counts give a finer, cleaner edge on laminate sheet, while lower tooth counts cut faster through thicker panel stock. Available in three variants — 300mm/96T, 120mm/12+12T, and 110mm/30T. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote with your required size.

3 variants available

PVC protective aprons for dipping and chemical-handling operations, giving workers a barrier against splashes and spills during wood preservative treatment. Available in free size, PVC material. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Water-based roller ink used for printing on plywood and panel products — grading marks, branding, or batch information applied directly on the panel surface. It's formulated to be waterproof and long-lasting once dry, so print stays legible through storage and handling. Available in Black, Red, Blue, and Green, each in 1 L packaging. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

4 variants available

Protective eyewear for chemical handling and cutting operations, giving eye protection wherever dipping chemicals are mixed or handled, or where saw and cutting work throws off dust and debris. Available in standard size, polycarbonate material. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

A continuous sanding roll for manual and semi-automatic finishing work, useful where a fixed drum belt isn't practical — smaller runs, spot finishing, or lines without a dedicated drum sander. Available in standard roll length, 120 grit. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Water-based screen ink for screen printing on plywood and panel products, giving a clean shine and a waterproof finish that holds up under normal storage and handling conditions. Available in assorted colors, packed in 1 kg tubs. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Sodium Dichromate is used as an insecticide and fungicide in wood treatment, helping protect plywood and panel products from insect and fungal damage during the dipping stage. It's supplied as a crystal-clear material. Packed in triple-layer packaging to protect the material in transit. Available in 25 kg bags, industrial grade. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing and lead times.

1 variant available

TCT (Tungsten Carbide Tipped) saw blades for cutting solid wood and plywood, with carbide tips brazed onto the blade body for a harder, longer-lasting edge than plain steel blades. Used across wood working, plywood, laminate, panel board, and furniture manufacturing wherever a straight, splinter-free cut matters. Tooth count is matched to the cut you need: lower tooth counts (48–60T) cut faster through solid wood and thicker panel stock, while higher tooth counts (96–120T) leave a finer edge suited to laminate and finished panel work. Available across five diameter/tooth combinations, from 175mm/60T up to 450mm/120T. Supplied under Ply Haat's ISO 9001:2015 quality system. Request a bulk quote with your required diameter and tooth count.

5 variants available

Hot-melt sticker sheets on a chromo paper base, used for labeling and branding plywood and panel products. Customization is available for logos, batch numbers, or product information. Available in standard sheet size, hot-melt type. Get in touch with your labeling requirements for a bulk quote.

1 variant available

Dry veneer stitching tape used to join veneer sheets edge-to-edge before pressing, keeping adjacent sheets flat and aligned so the panel doesn't shift under the hot press. The perforated finish helps the tape sit flush and release cleanly once the panel is pressed. On high-volume lines, this tape is often used alongside Ply Haat's corrugated fasteners for extra hold when joining large numbers of veneer sheets per shift. Available in 12mm width, dry and perforated. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

The wider format of Ply Haat's dry veneer stitching tape, used to join veneer sheets edge-to-edge before pressing. The extra width gives more coverage across the joint, which can help on larger or heavier veneer sheets. Like the 12mm tape, it's dry and perforated, and is often used alongside corrugated fasteners on high-volume veneer stitching lines. Available in 18mm width, dry and perforated. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available